ICMPv6¶

class os_ken.lib.packet.icmpv6.echo(id_=0, seq=0, data=None)¶

ICMPv6 sub encoder/decoder class for Echo Request and Echo Reply messages.

This is used with os_ken.lib.packet.icmpv6.icmpv6 for ICMPv6 Echo Request and Echo Reply messages.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
id	Identifier
seq	Sequence Number
data	Data

class os_ken.lib.packet.icmpv6.icmpv6(type_=0, code=0, csum=0, data=b'')¶

ICMPv6 (RFC 2463) header encoder/decoder class.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
type_	Type
code	Code
csum	CheckSum (0 means automatically-calculate when encoding)
data	Payload. os_ken.lib.packet.icmpv6.echo object, os_ken.lib.packet.icmpv6.nd_neighbor object, os_ken.lib.packet.icmpv6.nd_router_solicit object, os_ken.lib.packet.icmpv6.nd_router_advert object, os_ken.lib.packet.icmpv6.mld object, or a bytearray.

classmethod parser(buf)¶

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

An object to describe the decoded header.
A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.
The rest of packet.

serialize(payload, prev)¶

Encode a protocol header.

This method is used only when encoding a packet.

Encode a protocol header. Returns a bytearray which contains the header.

payload is the rest of the packet which will immediately follow this header.

prev is a packet_base.PacketBase subclass for the outer protocol header. prev is None if the current header is the outer-most. For example, prev is ipv4 or ipv6 for tcp.serialize.

class os_ken.lib.packet.icmpv6.mld(maxresp=0, address='::')¶

ICMPv6 sub encoder/decoder class for MLD Lister Query, MLD Listener Report, and MLD Listener Done messages. (RFC 2710)

http://www.ietf.org/rfc/rfc2710.txt

This is used with os_ken.lib.packet.icmpv6.icmpv6.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
maxresp	max response time in millisecond. it is meaningful only in Query Message.
address	a group address value.

class os_ken.lib.packet.icmpv6.mldv2_query(maxresp=0, address='::', s_flg=0, qrv=2, qqic=0, num=0, srcs=None)¶

ICMPv6 sub encoder/decoder class for MLD v2 Lister Query messages. (RFC 3810)

http://www.ietf.org/rfc/rfc3810.txt

This is used with os_ken.lib.packet.icmpv6.icmpv6.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
maxresp	max response time in millisecond. it is meaningful only in Query Message.
address	a group address value.
s_flg	when set to 1, routers suppress the timer process.
qrv	robustness variable for a querier.
qqic	an interval time for a querier in unit of seconds.
num	a number of the multicast servers.
srcs	a list of IPv6 addresses of the multicast servers.

class os_ken.lib.packet.icmpv6.mldv2_report(record_num=0, records=None)¶

ICMPv6 sub encoder/decoder class for MLD v2 Lister Report messages. (RFC 3810)

http://www.ietf.org/rfc/rfc3810.txt

This is used with os_ken.lib.packet.icmpv6.icmpv6.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
record_num	a number of the group records.
records	a list of os_ken.lib.packet.icmpv6.mldv2_report_group. None if no records.

class os_ken.lib.packet.icmpv6.mldv2_report_group(type_=0, aux_len=0, num=0, address='::', srcs=None, aux=None)¶

ICMPv6 sub encoder/decoder class for MLD v2 Lister Report Group Record messages. (RFC 3810)

This is used with os_ken.lib.packet.icmpv6.mldv2_report.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
type_	a group record type for v3.
aux_len	the length of the auxiliary data in 32-bit words.
num	a number of the multicast servers.
address	a group address value.
srcs	a list of IPv6 addresses of the multicast servers.
aux	the auxiliary data.

class os_ken.lib.packet.icmpv6.nd_neighbor(res=0, dst='::', option=None)¶

ICMPv6 sub encoder/decoder class for Neighbor Solicitation and Neighbor Advertisement messages. (RFC 4861)

This is used with os_ken.lib.packet.icmpv6.icmpv6.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
res	R,S,O Flags for Neighbor Advertisement. The 3 MSBs of "Reserved" field for Neighbor Solicitation.
dst	Target Address
option	a derived object of os_ken.lib.packet.icmpv6.nd_option or a bytearray. None if no options.

class os_ken.lib.packet.icmpv6.nd_option_pi(length=0, pl=0, res1=0, val_l=0, pre_l=0, res2=0, prefix='::')¶

ICMPv6 sub encoder/decoder class for Neighbor discovery Prefix Information Option. (RFC 4861)

This is used with os_ken.lib.packet.icmpv6.nd_router_advert.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
length	length of the option. (0 means automatically-calculate when encoding)
pl	Prefix Length.
res1	L,A,R* Flags for Prefix Information.
val_l	Valid Lifetime.
pre_l	Preferred Lifetime.
res2	This field is unused. It MUST be initialized to zero.
prefix	An IP address or a prefix of an IP address.

*R flag is defined in (RFC 3775)

class os_ken.lib.packet.icmpv6.nd_option_sla(length=0, hw_src='00:00:00:00:00:00', data=None)¶

ICMPv6 sub encoder/decoder class for Neighbor discovery Source Link-Layer Address Option. (RFC 4861)

This is used with os_ken.lib.packet.icmpv6.nd_neighbor, os_ken.lib.packet.icmpv6.nd_router_solicit or os_ken.lib.packet.icmpv6.nd_router_advert.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
length	length of the option. (0 means automatically-calculate when encoding)
hw_src	Link-Layer Address. NOTE: If the address is longer than 6 octets this contains the first 6 octets in the address. This implementation assumes the address has at least 6 octets.
data	A bytearray which contains the rest of Link-Layer Address and padding. When encoding a packet, it's user's responsibility to provide necessary padding for 8-octets alignment required by the protocol.

class os_ken.lib.packet.icmpv6.nd_option_tla(length=0, hw_src='00:00:00:00:00:00', data=None)¶

ICMPv6 sub encoder/decoder class for Neighbor discovery Target Link-Layer Address Option. (RFC 4861)

This is used with os_ken.lib.packet.icmpv6.nd_neighbor.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
length	length of the option. (0 means automatically-calculate when encoding)
hw_src	Link-Layer Address. NOTE: If the address is longer than 6 octets this contains the first 6 octets in the address. This implementation assumes the address has at least 6 octets.
data	A bytearray which contains the rest of Link-Layer Address and padding. When encoding a packet, it's user's responsibility to provide necessary padding for 8-octets alignment required by the protocol.

class os_ken.lib.packet.icmpv6.nd_router_advert(ch_l=0, res=0, rou_l=0, rea_t=0, ret_t=0, options=None)¶

ICMPv6 sub encoder/decoder class for Router Advertisement messages. (RFC 4861)

This is used with os_ken.lib.packet.icmpv6.icmpv6.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
ch_l	Cur Hop Limit.
res	M,O Flags for Router Advertisement.
rou_l	Router Lifetime.
rea_t	Reachable Time.
ret_t	Retrans Timer.
options	List of a derived object of os_ken.lib.packet.icmpv6.nd_option or a bytearray. None if no options.

class os_ken.lib.packet.icmpv6.nd_router_solicit(res=0, option=None)¶

ICMPv6 sub encoder/decoder class for Router Solicitation messages. (RFC 4861)

This is used with os_ken.lib.packet.icmpv6.icmpv6.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
res	This field is unused. It MUST be initialized to zero.
option	a derived object of os_ken.lib.packet.icmpv6.nd_option or a bytearray. None if no options.

ICMPv6

ICMPv6¶

os-ken 1.2.1